JDM Lighting

Post by **JaySmith** » April 17, 2005

Last night we wired up Mikes sidemarkers. However in doing so the sidemarker, and corner lights now alternate, but the sidemarkers, and tail lights are in sinc. If I recall, the JDM corner lighting, the inner corner light (closet to the grill) is ment to be on constantly, and the other light is ment to signal, and be on constantly. Can anyone help us out?

YouTube · Post by **.saint** » April 17, 2005

im not so familiar w/an integra wire up. and i heard this topic argued so many times. hopefully some1 from hipertek can help us here.

Post by **JaySmith** » April 17, 2005

Yeah I can't recall how to do it. A former friend of mine had his done correctly, but he's being an asshole, and won't respond to me on my old MSN. haha

Post by **BRYCE** » April 18, 2005

Yea i aint to familar with DC2 but i looked around H-T i didnt really find anything, but i am going to look again

Post by **JaySmith** » April 18, 2005

As of right now we have wired up the sidemarker to the corner light. There are 3 wires on the inner corner light. Red (Constant), Green (Signal), and Black (Ground). We of course wired them to the Green, and the Black. However when his cars headlights are not on, the signal properly. But as soon as he turns his headlights on, the corner lights alternate with one another.

Any idears?

.: vi||ain :. · Post by **.: vi||ain :.** » April 18, 2005

thx guyz for helping us try and solve this shizz