IACV

Teaks92HB · Post by **Teaks92HB** » September 09, 2008

Location on a b18b for the IACV, back bottom of intake? just need an idea so I can clean that shit out. I am very sick of my 3000 rpm cold starts and my 500 rpm warm idle.... I want it normal. thanks!

donninator321 · Post by **donninator321** » September 10, 2008

should be between the manifold and firewall. i believe it has two 12mm bolts about 1 1/2 inch long. also in view just by lookin at it directly.

Teaks92HB · Post by **Teaks92HB** » September 10, 2008

well, I removed the 2 12 mm bolts the 2 coolant lines, unplugged the connector, cleaned it all up and put her back on and it now idles at 4000 rpms..... lol. so I unplugged it and it dropped but ran like ass. So i'm just gonna get a new one.

Teaks92HB · Post by **Teaks92HB** » September 11, 2008

ok, so i replaced it..and still fucked up. gonna get a top end gasket kit and replace my manifold with one i cleaned so hopefully its just a gasket....

Teaks92HB · Post by **Teaks92HB** » September 18, 2008

Well.... it was my fast idle thermo valve. took it off and apart and it was completely unscrewed on the inside. cleaned, fixed and now she idle's normal.