I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain

Honda OEM fuel filter inlet size

engine. drivetrain. engine management & trouble codes talk.
Post Reply
User avatar
munster
Posts: 10705
Joined: January 31, 2003
Location: Somewhere between Heaven and Hell.

Honda OEM fuel filter inlet size

Post by munster » July 19, 2007

Can anyone verify that the bottom of the oem fuel filter is M14 x 1.5mm? I searched Honda-Tech, but I don't know who's knowledgeable and who's just regurgitating information from somewhere else.

I need to order an adapter to AN for the new hardline in my daily. (russell aluminum hardline) The fittings are $12 each and I don't want to order the wrong one. I don't have a filter around to check.
Built Motorsportswear - Function/Form Autolife - ICB Motorsports
Go Autoworks - K-Tuned - My friends
Top
User avatar
munster
Posts: 10705
Joined: January 31, 2003
Location: Somewhere between Heaven and Hell.

Post by munster » July 20, 2007

Nevermind. It is M14x1.5mm on the bottom of the filter on a 6th gen. I'll post all of the part numbers to convert the entire hardline to AN fittings and aluminum line (or stainless braided) when I'm done.
Top
Natural Aspirations
55% ricer
Posts: 370
Joined: August 11, 2005
Location: Altoona, Pa
Contact:
Contact Natural Aspirations

Post by Natural Aspirations » July 20, 2007

http://www.honda-tech.com/zerothread?id=1452210
Top
User avatar
munster
Posts: 10705
Joined: January 31, 2003
Location: Somewhere between Heaven and Hell.

Post by munster » July 21, 2007

I ended up finding that thread after the fact, but it's a good one to bookmark.
Top
Post Reply

Return to “general tech”