I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain

Integra owners 1/4 mile times and mods

third generation integra. [94-01]
Post Reply
Hercules
50% ricer
Posts: 418
Joined: February 03, 2005
Location: Altoona, pa
Contact:

Integra owners 1/4 mile times and mods

Post by Hercules » February 05, 2005

1/4 15.01
mph 92
60' 2.2

130k miles, intake, header, axle back and no powersteering belt. now i have full exuast on and removed the a/c i'm hopin to hit 14.8's 14.9's this spring but i need a new clutch

Hercules
50% ricer
Posts: 418
Joined: February 03, 2005
Location: Altoona, pa
Contact:

Post by Hercules » February 05, 2005

oh yeah thats on stock 15's, real shitty tires at 22 psi

User avatar
Dont Blink
60% ricer
Posts: 323
Joined: November 06, 2003
Location: Youngwood
Contact:

Post by Dont Blink » February 05, 2005

12.02@119mph

built bottom end
GT30R turbo(15psi)
pump gas
BFG drag radials
on a conservitive street tune

User avatar
miyagi
Posts: 1492
Joined: January 19, 2004
Location: Duncansville/Altoona, PA
Contact:

Post by miyagi » February 06, 2005

13.62 @ 103

JRSC @ 8 lbs, i/h/e/throttle body/jacked up ignition setup/stock clutch/stock exhaust, no axle back/stock 15's with half bald 512's

hoping to bust out a high 14 with the new setup before I go turbo haha ....
built 1.74 b16 bottom end, clutch masters fx400 and flywheel, everything from the old setup minus almost all the ignition stuff and the blower.

SC61 and Hondata time this year though boys .... then i'm done fucking around. Street tires, low 12's or better, and race gas from here on out :D

fltblkteg
80% ricer
Posts: 162
Joined: August 04, 2004
Location: dirty south
Contact:

Post by fltblkteg » March 11, 2005

my car ran a 13 something about two years ago (7psi) with the infamous dennis howell at the wheel bought a aem ems runnin drag radials some ssr's 3 inch exhaust atmosphere dump no interior at all (2 seats fiberglass dash and a cage) water injection and bigger injectors

BoostedITR41
90% ricer
Posts: 104
Joined: November 10, 2003
Contact:

Post by BoostedITR41 » March 12, 2005

12.86@113mph

stock bottom end other than a inline pro head gasket
18G turbo(17psi)
BFG drag radials
FMU, AFC, 450cc injectors, missing link, 255lph pump.
Hybridynamics tuned

12.004@125mph street tires, full weight, ac/ps on stock pulleys

TunedTypeR
100% ricer
Posts: 1
Joined: April 05, 2005

Post by TunedTypeR » April 05, 2005

Last time i ran i ran a 14.02 At 103 with a 2.0 60'.

I have a 99 B18C5 bottem end, 1995 B18C head, skunk2 intake manifold, dc sports drag headers, stage 2 excedy clutch, jdm gsr tranny and short air intake.
This was on a untuned ecu, i now have hondata, and a apexi n1 2.5' exhust should be at least 13.9 with this.. i hope..

Hercules
50% ricer
Posts: 418
Joined: February 03, 2005
Location: Altoona, pa
Contact:

Post by Hercules » May 15, 2005

New time with a 14.6 @ 95....drag radials but real bad launch. got some crower 403's, need valvetrain stuff first! :D

Post Reply