What's your setup??

spun vtec · Post by **spun vtec** » September 19, 2003

fone wrote:wish i could but i fucking started snapping bolts and stripping them thanks to the lovely 'no grease' bastards at burnsworth.

antiseaze is your friend!

jay99ek · Post by **jay99ek** » October 02, 2003

99 EX coupe

currently:
Gound Control coilovers w/ Tokico shocks

waiting to install:
TEIN Flex w/ EDFC
SRR rear LCA's
Comptech rear sway/tie bar combo

either Carbing front and rear strut tower bars or Mugen front and rear strut tower bars..

currently looking for lightened steering knuckles..

later..
Brembo slotted rotors for OE caliper
ARP extended wheel studs
steel braided brake lines
Benen strong bar
Hawk pads
and some other stuff i'm not sure off right now..

Post by **kotomile** » December 16, 2003

90 CRX Si
Ground Control Coilsleeves
Tokico Sports
generic rear bar
When I get time: install my Energy Suspension's.

Update 2-20-04:
DA front bar, neuspeed front upper, aligned better.
To come:

thicker rear swaybar.
rollcage
dedicated autox tires

***EDIT***

93 Mazda Miata
Ground Control 700F 325R
Bilstein HDs
25mm solid front bar
15mm solid rear bar
billet/poly endlinks
front racing beat swaybar bracket reinforcement
1956014 Dunlop SP Sport A2 - 14x6.5 BBS (street)
2254513 Hoosier A3S04 - 13x8 Diamond racing (race)

phan · Post by **phan** » December 18, 2003

nineteen ninety crx dx
stiff stuff
jic magic sf-1 full coilover
neuspeed front tower strut
generic front tower strut (yea, they both fit!)
crx hf front sway bar
spoon rear tower strut bar
rear da-integra sway bar
welded da-integra brackets to chassis
da-integra rear LCAs
stop stuff
nineteen ninety-one DA integra master cylinder (awaiting install)
nineteen ninety-one DA integra brake booster (awaiting install)
nineteen ninety-one DA integra prop. valve (awaiting install)
front
nineteen ninety-one DA integra knuckles
brembo blank rotors (10.2in v. stock 9.5in)
pbr/axxis ultimate pads
goodridge ss brake lines
rear
nineteen ninety one DA integra rear discs
brembo blank rotors
pbr/axxis metal master pads
stock brake lines

rubber
dd: falken ziex 205/50-15 (POS stockies now, randy's MR5s soon

)
auto-x: falken azenis 195/60-14 (civic hx wheels)

EGStreetHtch · Post by **EGStreetHtch** » December 20, 2003

APEXi 99 Type R spec N1 Dampers
Neuspeed front upper strut bar
Cusco rear upper strut bar
Matrix front lower tie bar
GSR rear sway bar
Autopower 4point bolt in roll bar
GSR Brakes f&r
SSR Schumachers
Volk/Rays lug nuts (red)
Kumho 712's

and i have the APEXi upper pillow ball mounts in my back seat, picked them up last night!

-Bryan-

Spoon AP1 · Post by **Spoon AP1** » January 18, 2004

2003 s2000
suspension:
Koni Yellows
Espelir Active Super Down springs
Cusco 32mm front sway
Cusco 30mm Rear sway
Spoon X-brace
Spoon rear tie bar
J's Racing engine damper
Cusco 5pt chromoly roll bar w/ harness bar
Advan RGs (C-West spec) 17x8.5 @ +38 17x9 @ +42
Yokohama AVS ES100s
Mugen lugs

I'm saving up for all the little bits and pieces.... J's Racing OWNZ U....

phan · Post by **phan** » January 18, 2004

[quote="Toda AP1"]...J's Racing OWNZ U.... ]

!@#! so true. i heart j's products.

Bart-EK · Post by **Bart-EK** » January 26, 2004

90 CRX VT
.A-sports pillar support frames
.Cusco front lower tie bar
.Spoon front upper strut bar
.Ebay cheap a$$ rear lower tie and rear upper strut... spoon upper and cusco lower on their way from tah land of rising sun
.koni yellows
.Custom springs... guy does racing stuff... dunno the spring rates but I guess I'm up on the kidney transplant list allready...

dropped about 3" front and 2 rear...
.crap bushings 2be replaced
.RH cup rims with the wrong offset
.Dunlop sp9000 front and BF Goodrich rear
more? phan.. what do I have more? you remember?

phan · Post by **phan** » January 26, 2004

not that i can remember...good to have you here tho, bart. bring some other heads over now.

Bart-EK · Post by **Bart-EK** » January 26, 2004

...

how do you want them? preserved or rotting away?