| thejdm.com v6 [2026 rebirth] https://thejdm.com/forum/ Print view |
|
| 1993 Lexus SC300, 723RWHP, 80mm, TH400, Weldon, ONLY 18K OBO https://thejdm.com/forum/viewtopic.php?f=56&t=10491 |
Page 1 of 1 |
| Author: | z32power [ February 08, 2009 ] |
| Post subject: | 1993 Lexus SC300, 723RWHP, 80mm, TH400, Weldon, ONLY 18K OBO |
I am looking to get into a 6-speed supra or a 996... trying to sell a few of my cars to get something new. This car was built to go fast, i didn't really car about looks... everything on this car was made for "go" no show. The good: -Made 723rwhp through the TH400 at only 33psi (a lot left on this turbo) it made this much power without even getting a full pass. it kept blowing off the intercooler piping at the throttle body, so MSP welded nice strap on there to keep it from blowing off in the future. -Everything on the car is ready to make even more power, it has tons of fuel room -Has a 125 wet fogger shot ready to go if thats not enough (never ran) What it needs: -Car's body is rough. I'd rate it 4.5/10 -Has an R-title due to theft -Needs a re-tune, as the car wants to bog once it reaches 3500 RPM. It only started doing this since i put in the new higher stall converter... so i am not sure if its just the tune or what. -It will need a cage, as this car is easy mid 9's right now as it sits. Looking to get 18k OBO MOTOR Built 3.0L 2JZ-GE w/ eagle rods, wiseco pistons GE Head with Ferrea dual coil springs and all ferrea valvetrain (stock valves & stock port) HKS 272 cams Unorthodox cam gears with magnet mod (hall sensor) Borg Warner S380 80mm hotside, 1.25AR hotside Modified XSPower manifold, braced, and heat wrapped. Custom 4" stainless turbo-back exhuast, all vbands Custom 3" aluminum intercooler piping Aftermarket Radiator Ebay 4" thick FMIC Boostwerx Intake Manifold w/ wilson throttle body FUEL Weldon 2035A Fuel Pump Weldon Dial-a-flow Weldon FPR Boostwerx custom -10AN fuel rail Precision 1600CC injectors All stainless braided lines, -10AN feed, -6AN return Aluminum 15gallon fuel cell in trunk Nitrous - 125 wet shot fogger installed and ready to go ECU/ELECTRONICS AEM - Daveh modded for distributor delete & Hall sensor HKS DLI TT Ignitor (new) DRIVELINE New Toyota Starter MSP adapter plate MSP flexplate MSP converter 3200 stall Hughes built trans reverse valve body + transbrake Driveshaft shop driveshaft Hurst pistol grip shifter Supra TT rear (auto) Megan Coilovers 28x11.5 rear ET streets, fit like a charm with Rota wheels RX7 front runners Twin Trans coolers w/ fans + stainless lines to the trans GAUGES/MISC Aem wideband gauge Aem Serial Gague Autometer boost gauge (55psi) Autometer FP gauge Autometer Trans temp gauge Seibon Carbon hood I know i am still missing a bunch of other stuff... i easily have 25k+ in mods on this car. Pics:
PM me for more details, etc. I can even deliver in my enclosed trailer (distance permitting).This entire motor/turbo setup has maybe 150 miles on it, and about 12 dyno pulls. VIDEO http://www.youtube.com/watch?v=5c8zSobj6Kc thanks, Joel |
|
| Author: | Jams_ek [ February 08, 2009 ] |
| Post subject: | Re: 1993 Lexus SC300, 723RWHP, 80mm, TH400, Weldon, ONLY 18K OBO |
nice glws |
|
| Author: | munster [ February 08, 2009 ] |
| Post subject: | Re: 1993 Lexus SC300, 723RWHP, 80mm, TH400, Weldon, ONLY 18K OBO |
It'd be nice to see a kick ass 996 around. Good luck with the sale, Joel. First the Z now the Lex... |
|
| Author: | boostjunkie95 [ February 10, 2009 ] |
| Post subject: | Re: 1993 Lexus SC300, 723RWHP, 80mm, TH400, Weldon, ONLY 18K OBO |
Ahhh that sucks. I was hoping to see it around this spring. Good luck with the sale. |
|
| Author: | .saint [ February 10, 2009 ] |
| Post subject: | Re: 1993 Lexus SC300, 723RWHP, 80mm, TH400, Weldon, ONLY 18K OBO |
good luck with the sale. |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|