| thejdm.com v6 [2026 rebirth] https://thejdm.com/forum/ Print view |
|
| VR4 Trans??? https://thejdm.com/forum/viewtopic.php?f=43&t=7685 |
Page 1 of 1 |
| Author: | 2.SloEK [ January 12, 2007 ] |
| Post subject: | VR4 Trans??? |
any one know if u can use the VR4 (AWD) trans just as FWD ? im thinkin no, but u never know these days lol |
|
| Author: | cimotorsports [ January 12, 2007 ] |
| Post subject: | |
Not sure why you would want to do that? Unless you are trying to use a awd tranny in a fwd car?? |
|
| Author: | Secret Squirrel [ January 12, 2007 ] |
| Post subject: | |
no... |
|
| Author: | 2.SloEK [ January 13, 2007 ] |
| Post subject: | |
yah my buddy had a auto base 3000GT baught a VR4 front clip. his auto trans is slipping badly.. guess were gonna have to start the VR4 swap early lol |
|
| Author: | sikblugsx [ January 13, 2007 ] |
| Post subject: | |
if its a stick yes if you install a viscous coupler eliminater or spool if not the viscous coupler will burn up because all the power will be sent to the rear axle which is not there actually the awd are alot stronger than the fwd tranny team rip makes a spool(very nice i have one in my eclipse)gives you a true 50/50 power split |
|
| Author: | cimotorsports [ January 14, 2007 ] |
| Post subject: | |
Hey don i think team rip went out of business.. remember when you ordered one from us for your 1g and it never showed up for months, i was thinking the same thing too but either way its a pain to do the swap anyways, we have pissed around with one up here at the shop in the past, customer wanted to swap this and that.. screw that.. best bet get a vr4 and be done with it honestly.. oh and while your at it dot forget to replace that oil pump while its all out.. those bastards are always going bad |
|
| Author: | sikblugsx [ January 14, 2007 ] |
| Post subject: | |
you have to buy directly from team rip |
|
| Author: | idreamidrive [ January 18, 2007 ] |
| Post subject: | |
oh... a 3000vr4, i thought you were talking about a gvr4. and yes they did make them in autos. and you can but you will be needing to do some welding |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|