thejdm.com v6 [2026 rebirth]
https://thejdm.com/forum/
Print view

cleanest jdm headlights
https://thejdm.com/forum/viewtopic.php?f=28&t=1459		 Page 1 of 2
Author:  G2_Fella [ February 22, 2004 ]
Post subject:  cleanest jdm headlights
i like to know who sell the CLEANEST jdm headlights. i'am eager to buy one asap.
Author:  .saint [ February 22, 2004 ]
Post subject: 
get ahold of ray at icbmotorsport. http://www.icbmotorsport.com and ask him for a set i imagine he can come across a set. good luck.
Author:  phan [ February 22, 2004 ]
Post subject: 
because they come plastic, the heads can be sanded and polished down quite easily. :)
Author:  G2_Fella [ February 24, 2004 ]
Post subject: 
thanx for the info fellas.
Author:  DA 9_Chinga [ February 26, 2004 ]
Post subject: 
i got a really clear and high quality set off ebay. There in exelent condition.
Author:  JDMjUnKiE* [ February 26, 2004 ]
Post subject: 
ive seen pairs being sold for like $125....but not the cleanest ive seen...a clean pair is around $200...like they say "you pay for what you get"......
Author:  phan [ February 26, 2004 ]
Post subject: 
get the cheapest NON-CRACKED set you can find if you don't mind sanding/polishing for a couple hours. take 1000grit then a 1500grit sand paper to the lenses, and then a plastic polish/compound afteward. they'll come out very nice :nod:
Author:  G2_Fella [ February 27, 2004 ]
Post subject: 
true, you get what you pay for. good info guys. hey phan, how's your homie xsi? i saw the rex looking tight and i know the teg will be too. peace.
Author:  phan [ February 27, 2004 ]
Post subject: 
he stripped it completely...it's almost ready to get painted. :up:
Author:  G2_Fella [ April 29, 2004 ]
Post subject: 
phan wrote:get the cheapest NON-CRACKED set you can find if you don't mind sanding/polishing for a couple hours. take 1000grit then a 1500grit sand paper to the lenses, and then a plastic polish/compound afteward. they'll come out very nice :nod:
hey phan, could you do the same to the amber lens too? if so, could you please give me a step by step instruction. thanx.
All times are UTC-04:00 Page 1 of 2

Powered by phpBB® Forum Software © phpBB Limited