| thejdm.com v6 [2026 rebirth] https://thejdm.com/forum/ Print view |
|
| Integra owners 1/4 mile times and mods https://thejdm.com/forum/viewtopic.php?f=27&t=2960 |
Page 1 of 1 |
| Author: | Hercules [ February 05, 2005 ] |
| Post subject: | Integra owners 1/4 mile times and mods |
1/4 15.01 mph 92 60' 2.2 130k miles, intake, header, axle back and no powersteering belt. now i have full exuast on and removed the a/c i'm hopin to hit 14.8's 14.9's this spring but i need a new clutch |
|
| Author: | Hercules [ February 05, 2005 ] |
| Post subject: | |
oh yeah thats on stock 15's, real shitty tires at 22 psi |
|
| Author: | Dont Blink [ February 05, 2005 ] |
| Post subject: | |
12.02@119mph built bottom end GT30R turbo(15psi) pump gas BFG drag radials on a conservitive street tune |
|
| Author: | miyagi [ February 06, 2005 ] |
| Post subject: | |
13.62 @ 103 JRSC @ 8 lbs, i/h/e/throttle body/jacked up ignition setup/stock clutch/stock exhaust, no axle back/stock 15's with half bald 512's hoping to bust out a high 14 with the new setup before I go turbo haha .... built 1.74 b16 bottom end, clutch masters fx400 and flywheel, everything from the old setup minus almost all the ignition stuff and the blower. SC61 and Hondata time this year though boys .... then i'm done fucking around. Street tires, low 12's or better, and race gas from here on out |
|
| Author: | fltblkteg [ March 11, 2005 ] |
| Post subject: | |
my car ran a 13 something about two years ago (7psi) with the infamous dennis howell at the wheel bought a aem ems runnin drag radials some ssr's 3 inch exhaust atmosphere dump no interior at all (2 seats fiberglass dash and a cage) water injection and bigger injectors |
|
| Author: | BoostedITR41 [ March 12, 2005 ] |
| Post subject: | |
12.86@113mph stock bottom end other than a inline pro head gasket 18G turbo(17psi) BFG drag radials FMU, AFC, 450cc injectors, missing link, 255lph pump. |
|
| Author: | TunedTypeR [ April 05, 2005 ] |
| Post subject: | |
Last time i ran i ran a 14.02 At 103 with a 2.0 60'. I have a 99 B18C5 bottem end, 1995 B18C head, skunk2 intake manifold, dc sports drag headers, stage 2 excedy clutch, jdm gsr tranny and short air intake. This was on a untuned ecu, i now have hondata, and a apexi n1 2.5' exhust should be at least 13.9 with this.. i hope.. |
|
| Author: | Hercules [ May 15, 2005 ] |
| Post subject: | |
New time with a 14.6 @ 95....drag radials but real bad launch. got some crower 403's, need valvetrain stuff first! |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|