I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain

FS: Lots of Dsm parts, all 1st Gen, Look!

buy. sell. trade. anything car and non-car related.
Forum rules
1. please familiarize yourself with the must read before buy. sell. trade!
2. please use sound judgement when, buying, selling & trading on the forum.
3. remember you are buying, selling & trading at your own risk.
4. to make the experience easier please list ways of contact in your post. name, state, email.
5. please be very descriptive of what you are trying to sell/trade. pictures help a lot.
Post Reply
OcLpRk8699
95% ricer
Posts: 75
Joined: July 11, 2003
Location: WI
Contact:

FS: Lots of Dsm parts, all 1st Gen, Look!

Post by OcLpRk8699 » November 11, 2005

Ok guys, i know im a lazy poster and im sorry for that, but this stuff needs to go... NOW!

So heres what we got, iv had 2 91' white talon tsi awd cars, iv collected all the parts and im going a major part out. Pics will be added shortly via barret (thx btw), and ull get to see the condition of all these wonderfull parts. All prices not including shipping if needed, but hey most of us live in wi. So heres what we got ------->

1) 1st gen 6 bolt, long block (complete head, complete bottom end), blew hg due to too much boost. So needs hg and most likely head studs, resurface wouldnt hurt but if you work with me i can get that done for free. Had roughly 109k miles on it when it blew. Asking 450$

2) 1st gen 6 bolt clutch, ill have to recheck make, but its a stage 2, 6 puck. Its only got about 2k miles on it if that even. Also comes with a resurfaced flywheel that was done at time of clutch. Asking 150$

3) TD05H Small 16G, no shaft play, farely new, has around 10-15k miles on it. Asking 350$

4) TD05H 14B, no shaft play, was just rebuilt about 5k miles ago. Asking 100$

5) I have (2) Second Gen manifolds, no cracks, good condition. Asking 75$ a piece.

6) Hard steel upper piping, goes from smic to tb. Also will include intake hard pipe has all necessary fittings from stock plastic pipe. Asking 65$

7) (2) Vaccume solenoids (vaccume controllers in upper right engine bay). Asking 20$ a piece.

8) Power steering pump. Asking 40$

9) Alternator. Asking 50$

10) (2) Brake master with vac asst. Asking 40$ a piece.

11) Clutch master. Asking 40$

12) Clutch slave, also only about 2k miles, good seals. Asking 20$

13) Brand new clutch extension rod, paid 29 @ dsmparts.com. Sappose to help with tranny grind by further disenguaging clutch. Asking 20$ still in package.

14) Brand new braided stainless clutch line. Paid 19.99 @ dsm parts. Asking 15$

15) Apexi N1 3" Downpipe/Cat-Eliminator. Has about 60 miles on it, paid 279$ @ dsm parts. Asking 150$.

16) Walbro 190/255lph fuel pump, this is my delema i know its a walbro pump either 190 or 255. Not sure on exactly which it is, but most likely the 255. A fp test would tell you for sure. Asking 50$, it is the whole assembly, 190's and 255's go for the same price either way.

17) 5spd tranny, also has 109k miles on it. Has 1st gear grind, and has grind going into second from first. Other wise the trick is, in nuetral to put it into second and put it into first and voila no grind. And the only time it grinds into second is if you rev out first and rip it into second, other wise the tranny doesnt grind at all. You just have to know the trick. Since the tranny does have a grind and everyone is aware of it ill let it go for 100$. I think thats a pretty good deal for a awd tranny.

18) Intake manifold, Also off the 109k mile motor. Still has coil packs and everything on it. Asking 50$

19) (2) Awd Transfer cases, one is from the 109k mile 5spd, and one is from the 150k mile automatic, i believe they are the same but i could most definately be wrong on that one. Asking 40$ a piece

20) Computer to 5spd awd, 91 talon. Asking 60$

21) Smic . Asking 50$

22) I have Autometer Phantom gauges (1) boost, (1) a/f. Asking 60 for pair, 70$ if you want the guage pod with the a-pillar trim.

23) I have the seats from an eclipse, im not sure what in specific, but they are really nice. They have leather with cloth in the back. Ill include the matching door panels. Asking 200$ (Barret help me out on these i know you know what they are, Kopplin you know also... help appreciated)

24) Really nice carpet from the same car. Asking 70$

25) Abs block. Sorry dont have the sensors for the rotors anymore. Asking 40$

26) Talon rims, I have 5, 3 of them will need new tires, i believe the 2 that are good have 225/50/16's on them. All white, Asking 100$ for all 5.

27) If you want eclipse rims i have a set of 4 with tires that all hold air, the problem with that is id need replacment rims for it so the chassis at least rolls, i dont care if there all donuts. Id only ask 20$ under those conditions.

28) I have 6x9's in the back, pioneer, not sure what series, they have the adaptor plates that bolt into stock location. Asking 80$ for both

29) I have a Pioneer deck, looks exactly like 4700mp, only doesnt have wma or mp3, ill find out tonight what it is. Price pending.

Thats going to cover it for now, like i said pics shortly and pm me or reply.
"Nitrous is kinda like a hot chick with an STD you really wanna hit it but youre afraid of the consequences! " By San Marlude on hirevwi.com

OcLpRk8699
95% ricer
Posts: 75
Joined: July 11, 2003
Location: WI
Contact:

Post by OcLpRk8699 » November 12, 2005

UPDATE

All the listed items have been sold

-hard intake lower intake pipe 20$ -chris @widsm.org
-5spd tranny 100$ pending chis @widsm.org
-Transfer case 40$ pending chris @widsm.org
-N1 dp 130$ pending ctak @widsm.org
-hard upper piping 45$ pending brian556 @widsm.org
-SS clutch line 15$ pending kevinJ @widsm.org

If i left anyone out let me know

User avatar
tenchu
Posts: 5691
Joined: July 11, 2003
Location: Somewhere, Iraq
Contact:

Post by tenchu » November 12, 2005

bump for nice shit well priced, ive seen it all, its straight :up:
Image
1993 RHD Impreza : Brembo : Zeal : Whiteline : Prodrive : Enkie : Cusco'd out

OcLpRk8699
95% ricer
Posts: 75
Joined: July 11, 2003
Location: WI
Contact:

Post by OcLpRk8699 » November 12, 2005

thx bro ;)

User avatar
tenchu
Posts: 5691
Joined: July 11, 2003
Location: Somewhere, Iraq
Contact:

Post by tenchu » November 12, 2005

werd nikkuh.

User avatar
Secret Squirrel
Posts: 7389
Joined: August 12, 2005
Location: "I'm like a Christmas tree, I just stand on the corner and let my balls hang"
Contact:

Post by Secret Squirrel » November 13, 2005

tenchu wrote:werd nikkuh.

:roll:

OcLpRk8699
95% ricer
Posts: 75
Joined: July 11, 2003
Location: WI
Contact:

Post by OcLpRk8699 » November 13, 2005

Secret squirrel wrote:
tenchu wrote:werd nikkuh.

:roll:
:wink:

Post Reply