WTB: exhaust cut out. manuel or electric

[hondalowlow]

i picked up a cut out from ebay last week and it came today, but it has a 1 3/4" dump outlet on it. not good for turbo flow rate.

so im looking for a 2.5" inlet and outlet 2 1/4" min
and 2.5" dump "cut out" 2.1/4" min

pm me if you got one lyaing around or know someone who does.

in kinda looking for a pre made y pipe that i can weld in and open manually or a electronic valve.

heres a pict. manuel one baove

electronic one below.

[hondalowlow]

bump

[kotomile]

atpturbo.com ?

[munster]

I'd go electric. Make it easier on you when you want to open it or go to the track. Especially going to the track since you have to do everything else.

[miyagi]

i have a brand new QTP 2 1/4 electronic cutout. I'll see if i can find it quick and get a few pictures up.

[miyagi]

actually ... i'll have to double check. It MIGHT be 2 1/2. I bought it so damn long ago that i can't remember.

[hondalowlow]

actually ... i'll have to double check. It MIGHT be 2 1/2. I bought it so damn long ago that i can't remember.

price?

i built my own 2.5" y pipe tonight and i made a flange for a extra 96-00 TB that i had lying around si i got a manuel one now but im intrestred in the electric one.

[munster]

I read on Honda-tech about the electronic cutouts. Alot of people said that from the vibration they start to leak after only a few drives.

[sikblugsx]

try this http://store.summitracing.com/partdetai ... toview=sku

[munster]

that summit one seems like it'd be better. You don't have the convenience of just flipping a switch, but at least it wouldn't leak with the plate on it.