thats exactly what you need. your car is OBD2, you want to convert it to OBD-1. you can get plug and play harnesses from hasport. now go look at there page. i demand it
| thejdm.com v6 [2026 rebirth] https://thejdm.com/forum/ Print view |
|
| engine harness, need help https://thejdm.com/forum/viewtopic.php?f=17&t=9269 |
Page 1 of 2 |
| Author: | crick_james [ November 10, 2007 ] |
| Post subject: | engine harness, need help |
here's the whole deal: i have a 97 jdm gsr swap in my ek coupe. my car is originally obd2 but i have the harness to convert it to obd 1. the owner of the car before myself, choped and hacked on the engine harness (the harness that comes from the ecu to the motor) and i really dont wanna put that "birds nest" back in it. so now here is where i really need some quick help and input, i would like to put another harness in it's place, so which harness will work. thanks for any sort of help |
|
| Author: | Teaks92HB [ November 10, 2007 ] |
| Post subject: | |
get new shit? if you dont wanna solder. i dont blame you for not wanting to put that shit back in. |
|
| Author: | Teaks92HB [ November 10, 2007 ] |
| Post subject: | |
why are you wanting to convert it to obd-2? |
|
| Author: | Teaks92HB [ November 10, 2007 ] |
| Post subject: | |
OBD-1 sorry |
|
| Author: | crick_james [ November 10, 2007 ] |
| Post subject: | |
yes, i want a new harness but i dont know what harness to buy |
|
| Author: | Nikku [ November 10, 2007 ] |
| Post subject: | |
you can buy conversion harnesses from just about anywhere these days. check out hasport. |
|
| Author: | crick_james [ November 10, 2007 ] |
| Post subject: | |
i dont need a conversion harness..... i need a new engine harness.... what i mean exactly (incase im not calling it the correct term) is the harness that will come from the obd conversion harness (which i have and will keep) to the connectors on the motor.. |
|
| Author: | CivicSpoon [ November 10, 2007 ] |
| Post subject: | |
Get a '96-'98 Civic harness. The EX harness will be the easiest (should only need to wire in the IAB stuff). But if you use a CX/DX/LX harness you'll need to make a few more changes. Here's a link of those changes (and additional info): http://honda-tech.com/zerothread?id=558245 Edit: Actually, what year is your car? |
|
| Author: | Secret Squirrel [ November 10, 2007 ] |
| Post subject: | |
send me the harness, ill fix it, charge you a fair price, cheaper then a new harness, and send it back to you. SS |
|
| Author: | Nikku [ November 11, 2007 ] |
| Post subject: | |
thats exactly what you need. your car is OBD2, you want to convert it to OBD-1. you can get plug and play harnesses from hasport. now go look at there page. i demand it |
|
| All times are UTC-04:00 | Page 1 of 2 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|