| thejdm.com v6 [2026 rebirth] https://thejdm.com/forum/ Print view |
|
| Honda OEM fuel filter inlet size https://thejdm.com/forum/viewtopic.php?f=17&t=8920 |
Page 1 of 1 |
| Author: | munster [ July 19, 2007 ] |
| Post subject: | Honda OEM fuel filter inlet size |
Can anyone verify that the bottom of the oem fuel filter is M14 x 1.5mm? I searched Honda-Tech, but I don't know who's knowledgeable and who's just regurgitating information from somewhere else. I need to order an adapter to AN for the new hardline in my daily. (russell aluminum hardline) The fittings are $12 each and I don't want to order the wrong one. I don't have a filter around to check. |
|
| Author: | munster [ July 20, 2007 ] |
| Post subject: | |
Nevermind. It is M14x1.5mm on the bottom of the filter on a 6th gen. I'll post all of the part numbers to convert the entire hardline to AN fittings and aluminum line (or stainless braided) when I'm done. |
|
| Author: | Natural Aspirations [ July 20, 2007 ] |
| Post subject: | |
http://www.honda-tech.com/zerothread?id=1452210 |
|
| Author: | munster [ July 21, 2007 ] |
| Post subject: | |
I ended up finding that thread after the fact, but it's a good one to bookmark. |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|