| thejdm.com v6 [2026 rebirth] https://thejdm.com/forum/ Print view |
|
| IACV https://thejdm.com/forum/viewtopic.php?f=17&t=10111 |
Page 1 of 1 |
| Author: | Teaks92HB [ September 09, 2008 ] |
| Post subject: | IACV |
Location on a b18b for the IACV, back bottom of intake? just need an idea so I can clean that shit out. I am very sick of my 3000 rpm cold starts and my 500 rpm warm idle.... I want it normal. thanks! |
|
| Author: | donninator321 [ September 10, 2008 ] |
| Post subject: | .. |
should be between the manifold and firewall. i believe it has two 12mm bolts about 1 1/2 inch long. also in view just by lookin at it directly. |
|
| Author: | Teaks92HB [ September 10, 2008 ] |
| Post subject: | |
well, I removed the 2 12 mm bolts the 2 coolant lines, unplugged the connector, cleaned it all up and put her back on and it now idles at 4000 rpms..... lol. so I unplugged it and it dropped but ran like ass. So i'm just gonna get a new one. |
|
| Author: | Teaks92HB [ September 11, 2008 ] |
| Post subject: | |
ok, so i replaced it..and still fucked up. gonna get a top end gasket kit and replace my manifold with one i cleaned so hopefully its just a gasket.... |
|
| Author: | Teaks92HB [ September 18, 2008 ] |
| Post subject: | |
Well.... it was my fast idle thermo valve. took it off and apart and it was completely unscrewed on the inside. cleaned, fixed and now she idle's normal. |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|