| thejdm.com v6 [2026 rebirth] https://thejdm.com/forum/ Print view |
|
| HF vs.Si brakes https://thejdm.com/forum/viewtopic.php?f=16&t=4271 |
Page 1 of 1 |
| Author: | mr.green [ July 13, 2005 ] |
| Post subject: | HF vs.Si brakes |
Can anyone tell me if HF front rotors/calipers are the same size as Si ones, or can be interchanged w/o mods? Also, can you fit any larger rotors/caliper combo on a HF spindle w/o major mods...such as EG SI/EX setups? I know DC2/EK Si setups do not fit up right...in case anyone was thinking of doing it. |
|
| Author: | ls.pwrd.hb. [ July 13, 2005 ] |
| Post subject: | |
hmmm ill check for ya |
|
| Author: | Nikku [ July 13, 2005 ] |
| Post subject: | |
the simple answer to this question is no, the hub/spindle/caliper/rotor is a different size on the Si....it would require mods to fit it onto an HF knuckle, save the time and energy and either get the Si knuckles, 90-91 EX civic knuckles or Teg knuckles (teg only for swaps) |
|
| Author: | mr.green [ July 13, 2005 ] |
| Post subject: | |
swapping is nat an option...already bought new Si hubs and wheel bearing for the hf spindles |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|