| thejdm.com v6 [2026 rebirth] https://thejdm.com/forum/ Print view |
|
| teg dash conversion https://thejdm.com/forum/viewtopic.php?f=15&t=1055 |
Page 1 of 2 |
| Author: | 86dx [ December 30, 2003 ] |
| Post subject: | teg dash conversion |
any one ever under took a integra dash conversion??? im looking at doing this but im not wanting to cut it up or make a fiber glass one either thanks for the help |
|
| Author: | .saint [ December 30, 2003 ] |
| Post subject: | |
skunk2rcng is doing this to his white EG. ill have to have him post some pics. i was just talking to him about it the other day.. he said it dont fit good at all. u gotta cut a good bit and its a pain in the ass. |
|
| Author: | g2JDMteg [ December 30, 2003 ] |
| Post subject: | |
ive been helping skunk, the wiring in the dash is the biggest problem, you need to do some dremeling behind the teg dash, nothing to the surface, its a time consuming project but well worth it. other than the dremeling, the stock eg door panals would have to be modified, the doors wont colse, so you need to either hack away at the door panal where it bulges out to rap around the dash, and then get them rapped or something.. options are open. Or you can do teg door panals, and thats another huge hassel, fitment with that is a huge bitch, so basically, be ready for a hugeee project |
|
| Author: | skunk2rcng [ December 30, 2003 ] |
| Post subject: | |
Huge project isn't even the word!!!! If you wanna talk about it in more detail AIM me at Area1320JDM or Spapics. Only 1 plug out of 4 plugs in..the rest of the hundred or so wires have to be hard wired  You need the integra heater core, DC2 dash w/ all wiring, etc....what fun... On a scale of 1-10 this is a 8...And i'll say my motor swap was a 6. So this is no joke. I have new pics now i'll post up with the cluster and everything in. I just need someone to host them for me. |
|
| Author: | munster [ December 31, 2003 ] |
| Post subject: | |
http://www.clubphoto.com or hit me up on IM. I have room to host some pics. |
|
| Author: | 86dx [ December 31, 2003 ] |
| Post subject: | |
well thanks for the info that stinks that your having so much of a problem i was hopeing if i got the door panels and the dash parts it would be a direct bolt in. i wouldnt be worried about wireing ive done so much of that anywho thanks again i look for the pics in the future how close do you think the delsol dashes are???? |
|
| Author: | skunk2rcng [ January 02, 2004 ] |
| Post subject: | |
no idea about the delsol dash. DC2 door panels don't bolt right on to a EG none of the clips line up. |
|
| Author: | skunk2rcng [ January 02, 2004 ] |
| Post subject: | |
Here's 2 pics with i started the fitment. Oh what fun. Once my cluster and air bag tray are in i'll post finished pics soon. 
thanks munsterEK |
|
| Author: | EJ25 [ January 03, 2004 ] |
| Post subject: | |
yeah dude....wait till the rest of it is done ! too bad the sides of the dash dont line up right and the door panels need to be modded...but all in all it looks tits! |
|
| Author: | g2JDMteg [ January 03, 2004 ] |
| Post subject: | |
wow reading the wiring diagrams suck, what a project a head! |
|
| All times are UTC-04:00 | Page 1 of 2 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|