| thejdm.com v6 [2026 rebirth] https://thejdm.com/forum/ Print view |
|
| project: goldrush. updated. https://thejdm.com/forum/viewtopic.php?f=14&t=1109 |
Page 1 of 4 |
| Author: | .saint [ January 06, 2004 ] |
| Post subject: | project: goldrush. updated. |
alright so i figure i might as well post a lil bit about the ek, and whats in store.. [center:8b65580598] [/center:8b65580598]new parts have been purchased today... j-oem ctr rear lip j-oem ctr ebrake --thanks to ray @ icb. waiting for a shipment... top fuel 3point pillarbar --thanks to sam @ jspec upcomming plans... ://exterior mission total underhood/under bumper respray w/goldrush backyard special front bumper [hopefully before may] seibon carbon fiber hood seibon carbon fiber wing seibon carbon fiber mirrors seibon carbon fiber hatch j-oem front rebar [lighter then us spec] j-oem rear rebar [lighter then us spec] ://interior mission total interior respray w/goldrush sell recaro's spoon carbon/kevlar buckets [atleast a driver] j-oem ctr maplight j-oem rear hatch light j-oem ctr pedals [since the access ones are 2 hard 2 find] j-oem steering column light [if i can get ahold of one, the rarest honda part imo] ://suspension/footwork mission if i get a set of rnr's --gsr front and rear brake conversion --buddyclub racing spec dampers --carbing front 3point tower bar --carbing rear tower bar --jim fab front crossmember --mugen rnr [black/red lip] :debating if this will clash with the spoon mecca? if i get sw388's --j-oem ctr 5 lug conversion --buddyclub racing spec dampers --carbing front 3point tower bar --carbing rear tower bar --jim fab front crossmember --spoon sw388 16" ://powerplant mission ls block [new. 0 miles] gsr head [new. 0 miles] gsr tranny as i figure out the setup ill keep you all posted.. --hide all wires. relocate battery/fusebox to the hatch. --pull everything from the firewall except master cylander. --clean bay and tune. tune. tune. ://pics --ls/vtec [just waiting for the rest of the money][center:8b65580598]
form+function2win.[/center:8b65580598] |
|
| Author: | kotomile [ January 06, 2004 ] |
| Post subject: | |
Whoa. Looks like you've got your work cut out for you, eh? As before, SICK FRIGGIN CAR!!!! |
|
| Author: | _drew [ January 06, 2004 ] |
| Post subject: | |
oh man... i want one of those 3 point pillar bars... you lucky, jdmbastard you... i cant wait to see this shit!!!! |
|
| Author: | ek four [ January 06, 2004 ] |
| Post subject: | |
damn... nice |
|
| Author: | ExcelSi [ January 06, 2004 ] |
| Post subject: | |
jesus!!!!!!! you bastard |
|
| Author: | munster [ January 06, 2004 ] |
| Post subject: | |
I still have to get my gsr front brakes on, and find myself a set of rear discs. Looks like we have our hands full this year with our cars. Work on yours one day, mine the next. We'll just alternate. |
|
| Author: | jdm delivery [ January 06, 2004 ] |
| Post subject: | |
it will never happen |
|
| Author: | Merilious [ January 06, 2004 ] |
| Post subject: | |
Makes me want an EK hatch... almost. How is it that theres 0miles on the new engine? Strait from factory? |
|
| Author: | .saint [ January 06, 2004 ] |
| Post subject: | |
sorry fed a lil bit of wrong info... ls/vtec with 0 miles, it hasn't been used after rebuilt and assembly |
|
| Author: | DA 9_Chinga [ January 07, 2004 ] |
| Post subject: | |
nice missions you got there bro, i cant wait to see this car in person once its all done. |
|
| All times are UTC-04:00 | Page 1 of 4 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|